Database Configuration

Configuring a MySQL or MariaDB Database

If you decide to use a MySQL or MariaDB database, ensure the following:

• That you have installed and enabled the MySQL extension in PHP
• That the mysql.default_socket points to the correct socket (if the database runs on same server as ownCloud).

The PHP configuration in /etc/php5/conf.d/mysql.ini could look like this:

# configuration for PHP MySQL module
extension=pdo_mysql.so
extension=mysql.so

[mysql]
mysql.allow_local_infile=On
mysql.allow_persistent=On
mysql.cache_size=2000
mysql.max_persistent=-1
mysql.max_links=-1
mysql.default_port=
mysql.default_socket=/var/lib/mysql/mysql.sock  # Debian squeeze: /var/run/mysqld/mysqld.sock
mysql.default_host=
mysql.default_user=
mysql.default_password=
mysql.connect_timeout=60
mysql.trace_mode=Off

Now you need to create a database user and the database itself by using theMySQL command line interface. The database tables will be created by ownCloudwhen you login for the first time.

To start the MySQL command line mode use:

mysql -uroot -p

Then a mysql> or MariaDB [root]> prompt will appear. Now enter the following lines and confirm them with the enter key:

CREATE USER 'username'@'localhost' IDENTIFIED BY 'password';
CREATE DATABASE IF NOT EXISTS owncloud;
GRANT ALL PRIVILEGES ON owncloud.* TO 'username'@'localhost' IDENTIFIED BY 'password';

You can quit the prompt by entering:

quit

An ownCloud instance configured with MySQL would contain the hostname on whichthe database is running, a valid username and password to access it, and thename of the database. The config/config.php as created by theInstallation Wizard would therefore contain entries likethis:

<?php

  "dbtype"        => "mysql",
  "dbname"        => "owncloud",
  "dbuser"        => "username",
  "dbpassword"    => "password",
  "dbhost"        => "localhost",
  "dbtableprefix" => "oc_",

SQLite Database

If you decide to use a SQLite database make sure that you have installed andenabled the SQLite extension in PHP. The PHP configuration in /etc/php5/conf.d/sqlite3.ini could look like this:

# configuration for PHP SQLite3 module
extension=pdo_sqlite.so
extension=sqlite3.so

It is not necessary to create a database and a database user in advancebecause this will automatically be done by ownCloud when you login for thefirst time.

An ownCloud instance configured to use sqlite only needs to contain thereference to a writable data directory (which is required for successfuloperation of ownCloud in general anyway). The config/config.php ascreated by the Installation Wizard could therefore containentries like this:

<?php

  "dbtype"        => "sqlite",
  "dbname"        => "owncloud",
  "dbuser"        => "",
  "dbpassword"    => "",
  "dbhost"        => "",
  "dbtableprefix" => "",
  "datadirectory" => "/var/www/html/owncloud/data",

PostgreSQL Database

If you decide to use a PostgreSQL database make sure that you have installedand enabled the PostgreSQL extension in PHP. The PHP configuration in /etc/php5/conf.d/pgsql.ini could looklike this:

# configuration for PHP PostgreSQL module
extension=pdo_pgsql.so
extension=pgsql.so

[PostgresSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0

The default configuration for PostgreSQL (at least in Ubuntu 14.04) is to use the peer authentication method. Check /etc/postgresql/9.3/main/pg_hba.conf to find out which authentication method is used in your setup.To start the postgres command line mode use:

sudo -u postgres psql -d template1

Then a template1=# prompt will appear. Now enter the following lines and confirm them with the enter key:

CREATE USER username CREATEDB;
CREATE DATABASE owncloud OWNER username;

You can quit the prompt by entering:

\q

An ownCloud instance configured with PostgreSQL would contain the path to the socket onwhich the database is running as the hostname, the system username the php process is using,and an empty password to access it, and the name of the database. The config/config.php ascreated by the Installation Wizard would therefore contain entries likethis:

<?php

  "dbtype"        => "pgsql",
  "dbname"        => "owncloud",
  "dbuser"        => "username",
  "dbpassword"    => "",
  "dbhost"        => "/var/run/postgresql",
  "dbtableprefix" => "oc_",

If you use another authentication method (not peer), you’ll need to use the following steps to get the database setup:Now you need to create a database user and the database itself by using thePostgreSQL command line interface. The database tables will be created byownCloud when you login for the first time.

To start the postgres command line mode use:

psql -hlocalhost -Upostgres

Then a postgres=# prompt will appear. Now enter the following lines and confirm them with the enter key:

CREATE USER username WITH PASSWORD 'password';
CREATE DATABASE owncloud TEMPLATE template0 ENCODING 'UNICODE';
ALTER DATABASE owncloud OWNER TO username;
GRANT ALL PRIVILEGES ON DATABASE owncloud TO username;

You can quit the prompt by entering:

\q

An ownCloud instance configured with PostgreSQL would contain the hostname onwhich the database is running, a valid username and password to access it, andthe name of the database. The config/config.php as created by theInstallation Wizard would therefore contain entries likethis:

<?php

  "dbtype"        => "pgsql",
  "dbname"        => "owncloud",
  "dbuser"        => "username",
  "dbpassword"    => "password",
  "dbhost"        => "localhost",
  "dbtableprefix" => "oc_",

Oracle Database

If you are deploying to an Oracle database make sure that you have installedand enabled the Oracle extension in PHP. The PHP configuration in/etc/php5/conf.d/oci8.ini could look like this:

# configuration for PHP Oracle extension
extension=oci8.so

Make sure that the Oracle environment has been set up for the process trying to use the Oracle extension.For a local Oracle XE installation this can be done by exporting the following environment variables(eg. in /etc/apache2/envvars for Apache)

export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib

Installing and configuring Oracle support for PHP is way out of scope for this document.The official Oracle documentation called The Underground PHP and Oracle Manualshould help you through the process.

Creating a database user for ownCloud can be done by using the sqlplus command line interfaceor the Oracle Application Express web interface.The database tables will be created by ownCloud when you login for the first time.

To start the Oracle command line mode with a DBA account use:

sqlplus system AS SYSDBA

After entering the password a SQL> prompt will appear. Now enter the following lines and confirm them with the enter key:

CREATE USER owncloud IDENTIFIED BY password;
ALTER USER owncloud DEFAULT TABLESPACE users
                    TEMPORARY TABLESPACE temp
                    QUOTA unlimited ON users;
GRANT create session
    , create table
    , create procedure
    , create sequence
    , create trigger
    , create view
    , create synonym
    , alter session
   TO owncloud;

You can quit the prompt by entering:

exit

An ownCloud instance configured with Oracle would contain the hostname on whichthe database is running, a valid username and password to access it, and thename of the database. The config/config.php as created by theInstallation Wizard would therefore contain entries likethis:

<?php

  "dbtype"        => "oci",
  "dbname"        => "XE",
  "dbuser"        => "owncloud",
  "dbpassword"    => "password",
  "dbhost"        => "localhost",

How can I find out if my MySQL/PostgreSQL server is reachable?

To check the server’s network availability, use the ping command onthe server’s host name (db.server.com in this example):

ping db.server.dom

PING db.server.dom (ip-address) 56(84) bytes of data.
64 bytes from your-server.local.lan (192.168.1.10): icmp_req=1 ttl=64 time=3.64 ms
64 bytes from your-server.local.lan (192.168.1.10): icmp_req=2 ttl=64 time=0.055 ms
64 bytes from your-server.local.lan (192.168.1.10): icmp_req=3 ttl=64 time=0.062 ms

For a more detailed check whether the access to the database server softwareitself works correctly, see the next question.

How can I find out if a created user can access a database?

The easiest way to test if a database can be accessed is by starting thecommand line interface:

SQLite:

sqlite3 /www/htdocs/owncloud/data/owncloud.db

sqlite> .version
SQLite 3.7.15.1 2012-12-19 20:39:10 6b85b767d0ff7975146156a99ad673f2c1a23318
sqlite> .quit

MySQL:

Assuming the database server is installed on the same sytem you’re running,the command from, use:

mysql -uUSERNAME -p

To acess a MySQL installation on a different machine, add the -h option withthe respective host name:

mysql -uUSERNAME -p -h HOSTNAME

mysql> SHOW VARIABLES LIKE "version";
+---------------+--------+
| Variable_name | Value  |
+---------------+--------+
| version       | 5.1.67 |
+---------------+--------+
1 row in set (0.00 sec)
mysql> quit

PostgreSQL:

Assuming the database server is installed on the same sytem you’re runningthe command from, use:

psql -Uusername -downcloud

To acess a MySQL installation on a different machine, add the -h option withthe respective host name:

psql -Uusername -downcloud -h HOSTNAME

postgres=# SELECT version();
PostgreSQL 8.4.12 on i686-pc-linux-gnu, compiled by GCC gcc (GCC) 4.1.3 20080704 (prerelease), 32-bit
(1 row)
postgres=# \q

Oracle:

On the machine where your Oracle database is installed, type:

sqlplus username

SQL> select * from v$version;

BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE  11.2.0.2.0      Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production

SQL> exit

Useful SQL commands

Show Database Users:

SQLite    : No database user is required.
MySQL     : SELECT User,Host FROM mysql.user;
PostgreSQL: SELECT * FROM pg_user;
Oracle    : SELECT * FROM all_users;

Show available Databases:

SQLite    : .databases (normally one database per file!)
MySQL     : SHOW DATABASES;
PostgreSQL: \l
Oracle    : SELECT name FROM v$database; (requires DBA privileges)

Show ownCloud Tables in Database:

SQLite    : .tables
MySQL     : USE owncloud; SHOW TABLES;
PostgreSQL: \c owncloud; \d
Oracle    : SELECT table_name FROM user_tables;

Quit Database:

SQLite    : .quit
MySQL     : quit
PostgreSQL: \q
Oracle    : quit